The Primus Wind Power digital wind control panel for use with all AIR Wind Turbines (see chart below). The panel is easy to install and will result in a professional operator station enhancing the beauty and value of the Hybrid system installation. WCP-D includes a full indoor only, black plastic enclosure. Dimensions are: L - 165mm W x  108mm D x - 63mm. The WCP - D helps to reduce installation costs and makes wiring a snap with just 4 wires to connect. The panel is available in 5 models specific to the AIR Wind Turbine – voltage and type.

The WCP-D controls and monitors the wind turbine. It is equipped with a power On/Off circuit breaker, digital meter and a Stop/Run switch (for direct control of the turbine). The digital meter (equipped with a 50 amp shunt) provides critical operational information; real time battery voltage, current in amps, power in Watts and accumulated energy in W/hours (re-settable). A clearly marked rear terminal block is provided for easy interconnect of the two turbine wires and two battery power wires. Panel is fully calibrated and ready for installation. 

 

SKU Breaker Size Suits Turbine Model
2-ARC-D-5 5 Amp AIR 40/BREEZE – 48 V
2-ARC-D-10 10 Amp AIR 40/BREEZE – 24 V
2-ARC-D-20 20 Amp AIR 30/AIR X MARINE/SILENT X – 48 V
AIR 40/AIR BREEZE – 12 V
2-ARC-D-25 25 Amp AIR 30/AIR X MARINE/SILENT X – 24 V
2-ARC-D-40 40 Amp AIR 30/AIR X MARINE/SILENT X – 12 V

 

SKU PWP.2-ARC-D
Model # 2-ARAC-D
Brand Primus Wind Power
Shipping Weight 0.8000kg
Shipping Width 0.200m
Shipping Height 0.500m
Shipping Length 0.150m
Shipping Cubic 0.015000000m3

Be The First To Review This Product!

Help other Outback Marine Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Related products