Victron Blue Smart IP65s Battery Charger 6V/12V-1.1A 230V AU/NZ
Blue Smart 6/12-volt, 1.1-amp waterproof battery charger for Lithium, AGM and GEL batteries with inbuilt Bluetooth and quick-connect leads.
SKU: VIC.BPC120134014R | MPN: BPC120134014R
SAVE 33%!
In Stock
Ships today from our Southport warehouse if order placed by 1pm
Victron Blue Smart IP65 Battery Charger
The Blue Smart IP65 Charger is a professional battery charger packed with features such as built-in Bluetooth to the Victron Connect App (Available on both iOS and Android). The Blue Smart IP65 Battery Chargers are ideal for use on cars, camper vans, caravans, RV's, tractors, motorcycles and boats and in the garage or on the farm.
Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Potential recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Temperature compensated charging
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Ultra high 95% efficiency “green” battery charger
- Setup and configure, readout of voltage and current by Bluetooth Smart
The battery is charged, smartly and to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life. Victron Blue Smart Chargers also feature a Storage Mode for less corrosion of the positive plates, typically most chargers only offer up to a float mode, the problem is that the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger for more than 48 hours.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease with Quick Fit connection
The charger comes supplied with both alligator clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected to your battery. Additional Quick Connects and Accessories are also available to purchase separately.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The VictronConnect app allows you to set up, readout and configure your Blue Smart IP65 Charger via your smartphone (Apple and Android). You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen, the readout of voltage and current is default available.
Battery Reconditioning
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with a low current up to a higher voltage.
Blue Smart IP65 Charger |
6 V/12 V - 1.1 A |
Input voltage and frequency range | 100 - 250VAC | 45 - 65Hz |
Efficiency | 82% |
Minimum battery voltage | Starts charging from down to 0 V |
Charge voltage 'absorption' | Normal: 7.2 V | 14.4 V High: 7.35 V | 14.7 V Li-ion: 7.1 V | 14.2 V |
Charge voltage 'float' | Normal: 6.9 V | 13.8 V High: 6.9 V | 13.8 V Li-ion: Disabled |
Charge voltage 'storage' | Normal: 6.6 V | 13.2 V High: 6.6 V | 13.2 V Li-ion: 6.75 V | 13.5 V |
Charge current Low current mode |
1.1A 0.5A |
Temperature compensation (lead-acid batteries only) |
8 mV/°C | 16 mV/°C |
Back current drain | 0.1 Ah/month (140uA) |
Protection | Reverse polarity, output short circuit, Over temperature |
Operating temp. range | -30 to +50°C (full rated output up to 30°C) |
Humidity (non-condensing) | Max 95% |
Charge algorithm | 7-stage adaptive |
Bluetooth | -4dBm, 2402 – 2480 MHz |
ENCLOSURE | |
Battery-connection | Black and red cable of 1.5 metre |
230V AC-connection | 1.5m cable with AS/NZS 3112 plug |
Protection category | IP65 (splash and dustproof) |
Weight | 0.4 kg |
Dimensions (h x w x d) | 38 x 64 x 153 mm |
STANDARDS | |
Safety | EN 60335-1, EN 60335-2-29 |
Emission | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
Immunity | EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
SKU | VIC.BPC120134014R |
Model # | BPC120134014R |
UPC/EAN | 8719076055150 |
Brand | Victron Energy |
Shipping Weight | 0.7600kg |
Shipping Width | 0.280m |
Shipping Height | 0.050m |
Shipping Length | 0.180m |
Shipping Cubic | 0.002520000m3 |
Unit Of Measure | ea |
Purchase with confidence knowing your product is covered by the Victron 5-year manufacturer warranty.
Be The First To Review This Product!
Help other Outback Marine Australia Pty Ltd users shop smarter by writing reviews for products you have purchased.
Related products
Victron Blue Smart IP65 Battery Charger 12/10(1) 230V AU/NZ
SKU: VIC.BPC121031014R
RRP $222.70
Now $149.92
Victron SmartSolar MPPT 100/20 12/24/48V Bluetooth Solar Controller
SKU: VIC.SCC110020160R
RRP $151.50
Now $101.95
Victron Battery Indicator Panel (M8 eyelet connector / 30A ATO fuse) for Blue Smart IP65 C
SKU: VIC.BPC900110114
RRP $35.60
Now $23.99
Victron Rubber Bumper for Blue Smart IP65 Battery Charger 12/10, 12/15, 24/8
SKU: VIC.BPC920100100
RRP $13.20
Now $8.88
Victron Blue Smart IP65s Battery Charger 12/5(1) 230V AU/NZ
SKU: VIC.BPC120533014R
RRP $143.50
Now $96.62
Victron 12 Volt plug (cigarette plug with 16A fuse) for Blue Smart IP65 Chargers
SKU: VIC.BPC900300014
RRP $21.80
Now $14.67
Victron Blue Smart IP65s Battery Charger 12/4(1) 230V AU/NZ
SKU: VIC.BPC120433014R
RRP $129.70
Now $87.29